The 295 Beam light , it is use lamp ,which is the branch brand of OSRAM .with Fix gobo 14+1 and colorful prism effects. it match the beam230 library .and it is best choice for small and middle scale shows.

Maintenance

Avoid electrical shock or fire by keeping the unit away from rain or moisture.

Intermittent use will extend the unit’s service life.

Clean the fan, fan net, and optical lens regularly to maintain optimal performance.

Do not use alcohol or other organic solvents to clean the shell.

Safety Precautions

Keep the product in a dry place and avoid environments above 60°C.

Ensure stable and secure installation.

Installation and dismantling should be performed by a professional.

Maintain power voltage fluctuation within ±10%. High voltage shortens light life, while low voltage affects performance.

After turning off the light, wait 20 minutes before restarting to allow for full cooling. Frequent switching reduces the lifespan of lamps and bulbs; intermittent use extends it.

Read the manual carefully for proper usage.

Cable Connection (DMX)

Use a cable conforming to EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity.

Do not use microphone cables or cables with different characteristics.

End connections must use XLR type 3 or 5-pin male/female connectors.

Insert a terminating plug with a 120Ω resistance (minimum 1/4 W) between terminals 2 and 3 into the last projector.

Ensure wires do not contact each other or the metal casing of the connectors. Connect the casing to the shield braid and pin 1 of the connectors.

Packing List

2x Omega Brackets

2m Outdoor locking 14AWG power cord

Specifications are subject to change without notice.